Audacity 1.3.13 Guide

A guide for users of the Jaws screen reader, written by David Bailes. More guides are available on the Jaws Guides page of the VIP Software Guides website.

New version of audacity now available

The remainder of this guide is for version 1.3.13 of Audacity. However, version 2.3.0 of Audacity, which contains new features and bug fixes, is now available from the Windows download page of Audacity's website. There's also a Jaws guide for this new version: Audacity 2.3.0 guide.

Contents

Introduction

Audacity is a free multi-track audio editor. You can use it for recording, simple editing of single tracks, or more advanced editing involving multiple tracks.

This guide is for the 1.3.13 beta version of Audacity. The reason for choosing the beta version is that a lot of work has been done since the last stable version (1.2.6) to make Audacity easier to use for users of screen readers. There is still work to be done in this area, but version 1.3.13 is much easier to use than version 1.2.6. Audacity 1.3.13 is available from the Windows beta download page of Audacity's website. The link to the Audacity installer for Windows 2000/XP/Vista/7 is in the Recommended Download section of this page. Note that this version of Audacity is not available for Windows 98/Me.

The remainder of this section introduces projects and the cursor in Audacity, and then describes the welcome message box and how to get help.

Projects

The objects which Audacity edits are known as projects. So projects are equivalent to documents in Microsoft Word, and workbooks in Microsoft Excel.

An Audacity project simply consists of a number of tracks.There are a number of different types of track in Audacity: audio, label, and time. However, the latter two are inaccessible to Jaws users, and so this guide will only describe the use of audio tracks. For many simple tasks you'll probably only have one track in a project.

You can save an Audacity project using the Audacity project file format, and this preserves all the tracks in the project. However, you only need to save a project in this format if you intend to continue working on the project in the future.

Cursor

Audacity has a cursor to specify a particular time during the audio, and this is similar to the cursor in Microsoft Word. The cursor in Audacity is used for defining times such as: the start of playback, the position where you want to start selecting a time range, and the place where audio is pasted from the clipboard.

Welcome message box

When you open Audacity, a Welcome message box opens, and this contains an HTML window which contains some information on how to obtain help for Audacity. Unfortunately the links in this text can't be opened using keyboard navigation, but details of the available help are given in the next section. The message box also contains a “Don't show this again at startup” check box. To stop the message box appearing in future, just check the check box, and press the OK button.

Help

Audacity is an extremely powerful program, and this is only an introductory guide. For more information see:

Main window

Main components

Moving around the window

Opening an audio file

To open either an audacity project file or a standard audio file, use the Open dialog, which is on the File menu (Ctrl + O). The dialog's title is “Select one or more audio files...”, and its structure is similar to the standard Windows XP Open dialog. The types of standard audio files which Audacity can open described in the next section.

When you first open Audacity, the window contains an empty track table, and so when you open an audio file, it opens in this initial window. After opening a standard audio file, the track table contains a single track, whereas after opening an Audacity project file, the track table contains all the tracks in the saved project. If you then open any other audio files, then they each open in a new window. (If you want to deliberately create a new window with an empty project, choose New from the File menu, or press Ctrl + N.)

In addition to opening standard audio files, you can also import one or more standard audio files into the current project. In this case, a new track is added to the track table for each of the files. For details, see the Importing audio files section.

Opening standard audio files

The default installation of Audacity can open audio files in the following standard formats: WAV, AIFF, AU, MP3, MP2/MPEG, Ogg Vorbis, and FLAC. In addition, you can open files in some other formats, including wma and m4a if you download and install the FFmpeg library, as described in the FFmpeg library section. This is not included in the installation of Audacity due to legal issues about patents. Note that Audacity 1.3.9 needs a newer version of this library than the version which worked with Audacity 1.3.7.

An alternative to using the FFmpeg library for opening files in other formats is to use another program to convert the file to one of the formats the default installation of Audacity can open. There are several audio format conversion programs available, for example, Switch which is free in its basic version, or dBpoweramp Music Converter.

If you open a compressed file, such as an MP3 file, then after you press the open button in the Open dialog an Import dialog opens which gives the progress of Audacity decompressing the file.

Saving audio

You can save the audio in a project in either the audacity project format, or one of the standard audio formats, as described in the following sections. The Audacity project format preserves all the tracks in the project. You only need to save a project in the audacity project format if you intend to continue working on the project in the future. In contrast, when you save in one of the standard audio formats, Audacity automatically mixes all the tracks down to a single track.

When you close Audacity, if you haven't saved your changes to an Audacity project file, then a Save changes? dialog opens asking you whether you want to save changes before closing. The default button is Yes, but unless you want to save the project as an Audacity project file, just Tab to the NO button and press it.

Saving audio in the audacity project format

To save in this format, choose Save Project... from the File menu. The first time you do this, you get a Warning dialog box telling you that only Audacity can read these project files. The dialog box contains a check box which you can check if you don't want this warning again. If you press the OK button, you then get a Save Project As dialog.

Saving audio in one of the standard audio formats

The default installation of Audacity can save in the following standard formats: WAV, Ogg Vorbis, FLAC, and MP2. In addition, you can save in some other formats if you download and install some additional libraries which are not included with Audacity because of legal issues with patents:

To save audio in one of the standard audio formats:

  1. To save all the audio, choose Export from the File menu. Alternatively, to save only the selected audio, choose Export Selection from the File menu.
  2. The Export File dialog opens, and its structure is very similar to a standard Windows XP Save As dialog.
  3. To set the file format which you want to use for saving the audio, there's a Save as type combo box, which is the next control after the File name edit box, which is the initial focus. Note that all the formats which use the FFmpeg library, have FFmpeg in parenthesis after their name.
  4. After choosing the file format, you can set the options for the encoding used by that format by tabbing to the Options button and pressing it. An Options dialog for the encoding opens. Since the MP3 format is often used, the numerous options for MP3 encoding are described in the following section.
  5. After you press the Save button, if you've tried to save in the MP3 format, but haven't configured the Lame MP3 library, then a Locate Lame dialog opens. Similarly, if you've tried to save in any of the formats included in the FFmpeg library but haven't already configured it, then a message box opens telling you that it needs to be configured.
  6. The Metadata editor dialog opens. This enables you to edit various items of information about the audio data, such as the Artist name, and the Track title, and is described in detail in the Metadata editor section later in the guide. If you don't want to edit any of the information, then you can just press Enter to press the default OK button. Note that if you press Esc to cancel the dialog, as well as cancelling any edits in this dialog, this also cancels the saving of the audio. If you don't want the Metadata editor to automatically open each time you save audio, then you can turn this option off, as described in the Metadata editor opens during export section, which is in the Preferences section.

MP3 options

This section describes the controls in the Specify MP3 options dialog, and then gives some recommendations for setting them. The dialog has the following controls:

These are some recommended settings:

For a full description of the options for the LAME MP3 encoder see the Lame page of the Hydrogen Audio wiki.

Playback

Playback depends on whether there is a time range selected (see the Selecting audio section): if there is no selection, then playback starts at the cursor position; if there is a selection, then playback starts at the start of the selection, and stops at the end of the selection.

The volume of the playback is controlled by the output slider which is on the Mixer toolbar in the Toolbars. This volume slider is in sync with the Windows main volume slider, and so also affects the volume of Jaws.

Keystrokes for playback:

Toolbars

The Toolbars section contains several different toolbars. You can navigate to all the controls in the Toolbars just by using the Tab key.

These are the different toolbars:

You can show and hide all these toolbars using the Toolbars sub-menu on the View Menu. Only showing the toolbars you're likely to use, such as the Mixer Toolbar, has the advantage of greatly reducing the number of Tabs needed to find a particular control.

Bug Warning: To press any of the buttons in the toolbar you can't use Spacebar as this key is used for starting and stoping playback. You should be able to user Enter but this incorrectly moves the focus to the next control rather than pressing the button. In practice, this isn't a big problem, since it's normally far more convenient to use keyboard shortcuts, rather than the buttons. However, one exception to this is the play at selected speed button, since by default it doesn't have a keyboard shortcut. There are a couple of work arounds to this problem:

Track table

The Track table contains the tracks which make up the project. The table just has one column, and a row for each of the tracks. Each track has a name, and Jaws reads this when you move to the track, or press Insert + Up Arrow to read the current line.

An audio track is a container for audio data, and this is displayed as a waveform. Often the audio data starts at time zero, but after editing, this is not always the case. At the left hand end of an audio track there is a small area containing various controls, which include a menu, and controls for track gain and pan. Using these controls is described in the More advanced editing section of this guide.

The Cursor is displayed in the track table as a vertical line, as is the playback position during playback. The positions of both the cursor and the playback position are available to Jaws users via the Selection Start and Audio Position spin boxes in the Selection Bar.

Track focus

Whenever the focus is within the track table, and the table contains one or more tracks (rows), then one of the tracks has the focus, and you can move between tracks by using Up Arrow and Down Arrow.

Track selection

You need to be able to select tracks:

You can select or deselect tracks using the following keystrokes:

Jaws tells you whether a track is selected, if you do any of the following:

More precisely, if you do any of the above, then:

Selection bar

There are six controls on the Selection bar, and as in any toolbar use Tab to move between them:

Edit spin boxes

Each of the spin boxes contains a time which can be in a number of different formats. The default format is hh:mm:ss, and you can change the format by choosing one of the options on a spin box's context menu. Changing one spin boxes format, in fact also changes the formats of the other spin boxes. The format hh:mm:ss + milliseconds is also a useful format when small time intervals are important.

The time can be considered to be made up of one or more sections, depending on the format used. For example, when using the hh:mm:ss format, the time consists of three sections each consisting of two digits: hours, minutes, and seconds. As another example, when using the hh:mm:ss + milliseconds format, the time consists of four sections: hours, minutes, seconds, and milliseconds which contains three digits.

If you move to a spin box by tabbing, then Jaws reads the entire contents of the spin box, for example, 00h13m04s, that is 0 hours, 13 minutes, and 4 seconds.

Within a spin box, one of the digits is the focus. When you first move to a spin box after opening Audacity, the first digit is the focus, but if you subsequently return to the spin box, then the digit which was the focus when you left the spin box is the focus. The keystrokes for moving the focus are:

When you use one of these keystrokes, Jaw reads the digit which is now the focus. In addition, if you've moved to a different section of the time, then Jaws reads the new section before reading the digit. For example, if the time is 01h42m38s and the focus is the second of the minutes digits (the digit 2), then if you press Right arrow Jaws says 38s3. Alternatively, if you press End then Jaws says 38s8.

To change the value of the time, you can either:

If you want to read the entire time, and you've either changed which digit is the focus, or changed the time, then unfortunately pressing Insert + Up Arrows just says blank. An easy work around it to press Tab, then Shift + Tab.

Snap To check box

If this check box is unchecked, then the positions of the cursor, and start and end of any selection can effectively have any value.

However, if the check box is checked, then the positions of the cursor, and the start and end of any selection can only be at times which are exactly specified by the current edit spin box format. For example, if format of the edit spin boxes is set to hh:mm:ss, then the cursor can be at 2 minutes and 10 seconds exactly, but not 2 minutes and 10.1 seconds. In other words, the cursor always snaps to the nearest time that can be exactly specified by the edit spin box format.

Moving the cursor

Audacity has a cursor to specify a particular time during the audio, for example, the start of playback, the position where you want to start selecting a time range, or the position where audio is pasted from the clipboard.

There are a number of ways of moving the cursor:

Selecting audio

In the case of an audio editor which can only edit a single audio track, then selecting audio simply consists of specifying the start and end times of the audio which you want to select, that is, a time range. For example you might want to select the audio between the times 1 minute 2 seconds and 5 minutes 23 seconds.

However, Audacity is a multi-track editor. If the project consists of a number of tracks, then you may want to select the audio on only some of the tracks for a given time range. So in Audacity, as well as having to select a time range, you also have to specify which tracks are selected. If you've selected some audio, tried to edit it, and nothing's happened, it may well be because none of the tracks are selected. The selection of tracks was described in the track selection section above, and selecting a time range is described in one of the following sections.

Select all audio option

There is an option to select all the audio in the project, if none is selected, and this option is on by default. This option affects what happens, for example, if you try to apply an effect when no audio is selected, that is either no tracks are selected and/or no time range is selected. If this option is off, then the commands on the Effects menu are unavailable, so stopping you from applying an effect. However, if this option is on, then even though no audio is selected the commands on the Effects menu are available, and the effect is applied to all the audio in the project. In addition, after the effect is applied, all the tracks are selected, and a time range which covers all the audio in the project is selected.

Because the automatic selection of tracks and time-ranges occur with no audible feedback, then for users of screen readers it's recommended that you turn this option off, as described in the Select all audio section of the Preferences section. All the instructions in the remainder of this guide assume that the option is off.

Selecting a time range

A quick way of selecting all of the audio in the project is to use the shortcut Ctrl + A: this selects all the tracks, and selects a time range which includes all the audio.

The general way of selecting a time range consists of two steps:

  1. Move the cursor to where you want to start the selection, as described in the Moving the cursor section above.
  2. Set the end of the selection.

There are a number of ways of setting the end of the selection:

Adjusting a selected time range

There are a number of ways of making small adjustments to a selected time range:

Deselecting a selected time range

If you press any of the keys which move the cursor (Home, End, Left Arrow and Right Arrow), then any selected time range is deselected. After you have pressed Left Arrow or Right Arrow, then the cursor position is at the start or end of the selection which has just been deselected.

To deselect all the tracks, and deselect any time-range, press Ctrl + Shift + A. The new cursor position is at the start of the selection which has just been deselected.

Basic editing

Undo and redo

To undo press Ctrl + Z, and to redo press Ctrl + Y.

Deleting audio

To delete the selected audio, press the Delete key.

If you want a preview of the audio after deletion, press C which plays back from a short time before the selected audio to a short time after the selected audio, but omitting the selected audio. The length of the times of playback before and after the selection can be set in the Cut Preview section of the Playback category in the Preferences dialog.

Cut, Copy, and Paste

Replace with silence

To replace the selected audio with the same length of silence, choose Silence Audio from the Edit menu (Ctrl + L).

Insert silence

To insert a period of silence into the selected tracks:

  1. Move the cursor to where you want to insert the silence.
  2. Choose Silence from the Generate menu.
  3. A Silence Generator dialog opens, and the focus is a spin box which allows you to specify the length of the silence. The spin box is identical to the spin boxes used on the Selection bar, though the default format is just seconds, and the first non-zero digit is the initial focus, rather than the first digit.

    Bug Warning: When you first open the dialog, Jaws incorrectly reads the default time in the spin box as zero seconds. To read the time correctly, you can just press Tab a few times to come back to the spin box.

    Set the time that you want, and then press Enter to press the default OK button.

Note that all the commands on the Generate menu have the following behaviour. If one or more tracks are selected, but no time-range, then the generated audio is inserted at the cursor. However, if a time-range is also selected, then the selected audio is replaced by the generated audio. Also, all the spin boxes in the dialogs which are opened from the Generate menu have a default format of seconds, and the first non-zero digit is the initial focus, rather than the first digit.

Effects

Audacity provides a large number of effects which are available on the Effects menu. Some of the commands, like fade in or fade out, simply execute the effect on the selected audio, but most of them open a dialog box so that you can adjust the parameters for the effect.

Nearly all the effect dialogs contain a Preview button which allows you to hear a short sample of the effect applied to the selected audio. By default, the length of the preview is 3 seconds, but you can change this in the Preferences dialog. In the Playback category there's a Length of preview edit box, and the units are seconds.

Deleting tracks

More advanced editing

Adding a new empty track

To add a new empty track, choose an option from the Add New sub-menu which is on the Tracks menu.

Importing audio files

You can import one or more audio files, and these become new tracks in the existing project. To import standard audio file(s), open the File menu, and choose Audio from the Import sub-menu (Ctrl + Shift + I). A “Select one or more audio files” dialog opens, which has the same structure as a standard Windows XP Open dialog. Select one or more files, and press Enter to press the OK button.

Note that immediately after the import, the last track in the project is selected, and all other tracks are unselected.

Duplicate

To duplicate the selected audio into new track(s), choose Duplicate on the Edit menu. The duplicated audio retains the same timings as the original selected audio, so in the new track(s) the audio data starts at the start of the selected time range.

Time shift one or more tracks

You can time shift the audio data in one or more selected tracks so that either the start or the end of the audio is at some desired position. You can specify this position either with the cursor, or the start or end of a selected time range. All the commands for moving the audio are available on the Align Tracks sub menu which is on the Tracks menu, and some examples of using them are given below.

For example, to move the audio in one or more tracks so that it starts at some desired time:

  1. Move the cursor to the desired time, using any of the methods described in the Moving the cursor section.
  2. Select the tracks containing the audio you want to move, and make sure that the other tracks are not selected.
  3. Open the Align Tracks sub menu on the Tracks menu, and choose Align with Cursor. Note that if more than one track has been selected, and the audio in these tracks start at different times, then the audio in all the tracks is moved by the same amount, so that the earliest audio in the tracks is positioned at the cursor.

If you'd wanted to move the audio in one or more tracks so that it ended at some desired time, then you'd simply change step three to use the Align End with Cursor command, instead of Align with Cursor.

As another example, if you want to time shift one or more tracks by a certain amount of time, then:

  1. Select one or more tracks that you want to time shift, and make sure that the other tracks are not selected.
  2. Press J to move the cursor to the start of the audio in the selected tracks.
  3. Move to the Selection Start spin-box in the Selection bar, and if necessary, change the format to hh:mm:ss + milliseconds.
  4. Depending on whether you want to time shift forward or backward, you now need to move the cursor forward or backward by incrementing or decrementing the time in the spin-box. For example, if you want to move the audio forward by one point 5 seconds, then use the following keystrokes to increment the time : End moves you to right most digit, which is milliseconds; Left Arrow twice moves you to the hundreds of milliseconds digit; Up Arrow five times increments this digit by five; Left Arrow moves you to the seconds digit; and finally, Up Arrow increments this digit by one.
  5. Go to the Align tracks sub-menu on the Tracks menu, and choose Align with Cursor. This moves the data in the selected selected tracks, so that is now starts at the modified cursor position.

Note that if you're wanting to move a track which you've recorded and which doesn't line up with the existing tracks, then you may need to move the start of the audio to earlier than time zero. Because you can't move the cursor before time zero, the above method has to be modified so that in step two, you press K to move to the end of the audio in the selected tracks, and then in step five, you use the Align End with Cursor command. Note that Audacity does have an automatic latency correction.

Track menu

You can open the menu of a focused track by pressing either the Application Key or Shift + M. The options on the menu include renaming the track.

Track gain

To change the gain of the focused track, press Shift + G. A Gain dialog opens which contains both an edit box and a slider for changing the gain. The range of gain (db) is -36 to +36.

Track pan

To change the pan of the focused track, press Shift + P. A Pan dialog opens which contains both an edit box and a slider for changing the pan. The range of pan is -1 to 1, corresponding to left and right.

Track Mute and Solo

Each track has a mute setting which can be on or off, and a solo setting which can also be on or off. These settings are used to control which tracks contribute to playback, and in addition the mute settings, but not the solo settings, affect which tracks contribute to audio saved in one of the standard formats. By default, the mute and solo settings for each track are off. After reading the name of the track, Jaws says mute on, if the mute setting is on, and solo on, is the solo setting is on.

Mute

If a track's mute setting is on, then it doesn't contribute to playback, or to the audio saved in one of the standard formats. You can either change the mute setting of an individual track or the settings of all the tracks:

Solo

If one or more tracks have their solo setting on, then only these tracks contribute to playback, regardless of the Mute settings of all of the tracks. To toggle the Solo setting of the focussed track, press Shift + S.

There are, in fact, a couple of options for how the Solo settings and the Mute settings of the tracks interact with each other. Using the default option, the Solo and Mute settings are completely independent: changing a mute setting has no effect on any Solo setting, and changing a Solo setting has no effect on any Mute setting.

The options for how the Solo and Mute settings interact can be found under the Interface category of the Preferences dialog. There's a solo button combo box in the Other interface choices section which has the options: standard (default), simple, and none. For users of screen readers, the simple option is not actually very simple, and the none option removes the solo option from the tracks.

Metadata editor

Metadata is data which describes other data, and the metadata for audio files consists of a number of tags, where each tag is made up of a tag name and a tag value. The Metadata editor in Audacity allows you both to edit the values of a number of preset tags, and also to create your own custom tags.

You can open the Metadata editor at any time by choosing Open Metadata Editor from the File menu. In addition, if you save audio in one of the standard formats, then unless you've turned the appropriate option off, the Metadata editor automatically opens, as described in the Saving audio section above.

The Metadata editor contains the following controls:

The table

The table has two columns: Tag and Value, and the first 7 cells in the Tag column contain preset tag names such as Artist Name and Track Title. Jaws indicates that these preset tag names are not editable by saying unavailable after their names.

To navigate the table:

Editing tag values

All the tag values except the genre tag value are edited using an edit box, but the genre tag value is edited with an edit combo box, which allows you to quickly choose from a list of genres.

To edit any tag value, except the genre tag value, there are two options: either overwriting or editing the current value, as described below. Both involve using the keystrokes Enter or Tab to confirm the edit. Enter moves you the cell immediately below the current cell, and Tab moves you to the next cell, which is the tag name in the next row.

To edit the genre tag value:

Creating and editing custom tags

You can use the rows in the table after the preset tags to create your own custom tags. In these rows you can edit both the tag name and the tag value.

For a new set of metadata, there's one spare row after the preset tags. You can add and remove rows from the table using the Add and Remove buttons which follow the table. The Add button appends a row, and the Remove button removes the current custom row.

Editing the list of genres

To edit the list of genres which is available in the edit-combo box when you edit the genre value:

  1. Press the Edit button in the Genres section.
  2. An Edit Genres dialog opens. The first control is a multi-line edit box which contains the genres, one genre on each line. Note that when you first open the dialog, all the genres are selected, so unless you type a text navigation keystroke first, for example Right Arrow, you'll overwrite all the genres. To move to the top or bottom of the list press Ctrl + Home or Ctrl + End respectively.
  3. When you've finished editing, Tab to the OK button and press it.

To reset the list of genres to the default list of genres, press the Reset button in the Genres section. A Reset Genres message box opens, asking you whether you're sure that you want to reset the list. Press Enter to press the default OK button.

Recording

The next three sections on settings, recording controls, and adjusting the input volume cover material which is relevant to nearly all recording. After that there's a latency correction section, which describes how Audacity can correct for the delay in the recorded audio when recording a vocal track whilst listening to existing tracks.

Recording settings

There are a number of settings which may need changing before you make a recording, and they're described in the following sections. Note that a number of these settings can be made either in the Devices section of the Preferences dialog or an individual dialog, or the Device Toolbar. Due to a bug when using the Device Toolbar using the keyboard, it's recommended that in these cases you use one of the other alternatives.

Input device

Input device. You can select the input device using either the recording device combo box in the Devices category in the Preferences dialog, or the input device combo box in the Select Input Device dialog (Shift + I), or the input device combo box on the Device toolbar.

If an onboard sound chip or an internal sound card has a number of possible inputs, such as microphone or line in, then each of these inputs is listed as a separate device in the combo boxes. In addition, available devices may also include either “Microsoft Sound Mapper - Input” or “Primary Sound Captive Driver”. Both of these correspond to the device which has been set as the default recording device in Windows. It's normally recommended that you choose the device explicitly, rather than use the default device.

In Windows Vista and 7, these combo boxes list all the recording devices which were plugged in and enabled when audacity was opened. If a device isn't listed, then check the Recording page of Windows Sound dialog to see if the device is enabled. This dialog is described in the Sound dialog in Vista and Windows 7 section, for those unfamiliar with this dialog.

Input volume

This section describes where to adjust the input volume. How to adjust the input volume so that you don't get too much noise or clipping is described in the Adjusting the input volume section below.

For many input devices, the input slider, which is on the Mixer Toolbar in the Toolbars section of Audacity's main window, is in sync with the the operating system's volume slider for that device. When this is the case, you can use either Audacity's or Windows's slider, and it's normally easier to use the slider in Audacity. If the current focus is the track table, then press Ctrl + F6 twice to move to the Toolbars, and then press Tab or Shift + Tab until you get to the input slider.

However, in some cases, Audacity is unable the volume of the input device, and this is indicated by the input slider on the Mixer Toolbar being unavailable. For sighted users, the slider appears greyed out, and for users of screen readers, you can't Tab to it. In these cases you have to use Window's volume slider for the device. For Windows Vista and 7 this is described in the Sound dialog in Vista and Windows 7 section. In Windows XP:

  1. In the Control Panel, open the Sound and Audio Devices Properties dialog.
  2. Move to the Audio page of this dialog, where there's a Sound recording default device combo box. Select the device in this combo box, and then Tab to the next control which is a Volume button, and press it.
  3. A dialog opens, which contains a volume slider for the device.

Bug Warning: On some computers running Windows Vista, if Audacity is open and you change the input volume, then when you next start recording, the volume is reset to its original value. However, this reset does not occur if Audacity is in the process of recording a track. So there are two ways of working around this bug:

Number of channels

The number of channels of the recording device can be set using either the recording channels combo box in the Devices category of the Preferences dialog, or the input channels combo box in the Select Input Channels dialog (Shift + N), or the Input Channels combo box in the Device toolbar. If you're recording using a microphone, then the appropriate setting depends whether it's a mono or stereo microphone.

Sampling

The default sampling rate for a new project is 44100Hz, and the default sampling format is 32-bit float. These should be fine, but they can be changed in the Quality category of the Preferences dialog, as described in the Sampling section of the Preferences section.

Overdub option

The Overdub option controls whether Audacity plays any existing tracks while recording a new one. You can check or uncheck this option either on the Transport menu, or in the Recording category of the Preferences dialog.

Software Playthrough option

The Software Playthrough option controls whether Audacity plays the new track while it is being recorded. Normally this option should be off, but it's useful if you want to hear what you're recording from a device such a USB turntable. It can be checked or unchecked either on the Transport menu, or in the Recording category of the Preferences dialog.

Audio host

Audacity enables you to use either MME or Windows DirectSound. These are two different software interfaces which can be used as part of the interface between Audacity and the hardware sound devices. The usual recommendation is to use the DirectSound interface, but if you have a problems with it, then just try MME.

You can set this option using either the Interface host combo box in the Devices category of the Preferences dialog, or the Audio host combo box in the Select Audio Host dialog (Shift + H), or the Audio Host combo box on the Device toolbar. Note that when you change this option, the settings of the input and output devices may change, and so you check these settings.

Recording controls

Adjusting the input volume

There is an input level meter provided for helping to set up the input volume, but it isn't accessible to Jaws users. However, it's easy to set up the input volume by making some short test recordings and using the dialog box of the Amplify effect to measure the peak level of the recorded sound. Before giving a list of step by step instructions for making the test recordings, there's a description of how the Amplify dialog can be used to measure the level of the recorded sound.

If you select some audio, and then open the Amplify dialog on the Effects menu, then the initial focus is on an Amplification edit box. The initial value in this edit box is the amount of amplification in decibels needed so that the recording uses the full dynamic range, and it indicates if you need to change the value of the input volume. Normally a good value to aim for if about 6db. This should ensure that the recording level is both low enough so that distortion or clipping doesn't occur, and high enough so that you don't get an unnecessary amount of noise. So if the value's less than about 6, try lowering the volume, and if it's more than about 6, try increasing the volume.

To make some short test recordings so that you can adjust the input volume, start with an empty project. The location of the input volume slider depends both on the input source, and on the version of Windows, and was described above in the Input Volume section. Note that the latter section describes a bug when setting the input volume which occurs on some computers running Windows Vista, so if that bug is present on your computer you'll have to incorporate one of the work arounds described in that section into the instructions below. Go round the following loop until you are happy with the setting:

  1. Move to the appropriate volume slider. If this is the first time round this loop, set the slider to your best guess. On subsequent times round the loop, adjust the slider on the basis of the Amplification value in the Amplify dialog the previous time round the loop. If the volume slider isn't in Audacity's main window, then switch back to the Audacity window for the remaining steps.
  2. Press R to start the recording.
  3. Make some representative noises for a short while, and then press Spacebar to stop.
  4. Press Ctrl + A to select all the audio.
  5. Choose Amplify from the Effects menu.
  6. The Amplify dialog opens, and the initial focus is on the Amplification edit box. On the basis of this value, decide if you need to repeat this loop with a different setting of the input volume slider as discussed above.
  7. Press Esc to close the Amplify dialog box.
  8. Choose Remove Tracks from the Tracks menu to delete the test track.

Latency correction

If you record a vocal track whilst listening to one or more existing tracks, then due to various delays, the newly recorded track won't be in sync with the original tracks. The total delay is known as the latency and some of the factors which affect its size are: the recording and playback devices, the size of the audio buffers within Audacity, and the software interfaces being used (for example, MME or DirectSound).

Audacity can automatically correct for the latency, once the latency has been measured, as described below. In the Preferences dialog, under the Recording category, there's a Latency correction edit box, where the units of the correction are milliseconds. If you record audio in a new track, then the audio is automatically moved later in time by this latency correction. So to shift the audio earlier in time to offset the latency, the number should be negative.

The default value of the latency correction is -130 milliseconds. However, if you've changed the value of the correction using versions of Audacity prior to 1.3.7, then your value will be unchanged after you've updated to version 1.3.7. The default value will be only roughly correct for a particular recording set up, and it's recommended that you measure the actual latency.

The following method for measuring the latency when using a microphone for recording is accurate to about 10ms, which normally should be good enough. It consists of the following three parts, which will be described in detail in the following sections:

  1. Generate a click track, which consists of a series of clicks with 1 second spacing.
  2. Record this click track. Due to latency and its current correction, the clicks in the recorded track may occur before or after the clicks in the original track.
  3. With the help of the selection start spin box in the Selection bar, find the position of the click in the recorded track which corresponds to the click at 1 second in the generated track, and work out a new correction.

Generate a click track

  1. Choose Click Track from the Generate menu.
  2. The second control is the Tempo [beats per minute] edit box, and its default value is 120. Type 60, and then press Tab twice to move to the next edit box.
  3. The Beats per measure [bar] edit box has a default value of 4. Type in the number 1, and then press Enter to press the default OK button.
  4. The click track is created. The track is initially selected, and a time range is selected which includes all the audio.

Record the click track

To record the click track being played back through your headphones, you'll obviously need to take them off temporarily. If you're using a separate microphone, rather than a headset microphone, then position it close to the headphones so that it can pick up the clicks. Press R to start the recording, and then press Spacebar to stop the recording after a handful of clicks.

With the first track still being the focus, press Shift + U to mute it, and then playback the recorded track. If the clicks are very quiet compared to Jaws, then amplify the track:

  1. Unselect the first track, and select the second track
  2. Press Home, then Shift + End to select a time range.
  3. Choose Amplify from the effects menu.
  4. In the Amplify dialog, just press Enter to accept the default amplification.

Find the position of a click in the recorded track

The following instructions describe how to find the position of the recorded click which corresponds to the click which occurs at 1 second in the generated track, and then update Audacity's latency correction. It's assumed that the original track is still muted from when you checked the level of the recorded track above.

  1. Press Home to set both the selection start and selection end/length spin boxes in the selection bar to zero.
  2. Press Ctrl + F6 to move to the selection bar. Tab to the End/Length radio buttons, and make sure that the Length option is selected.
  3. Then Tab to the Selection Start spin box. Open its context menu, and choose hh:mm:ss + milliseconds. Using this format, the Selection Start spin box consists of four sections: the h edit spin box , the m edit spin box, an unnamed edit spin box which is the seconds, and the s edit spin box (three digits) which is milliseconds.
  4. To set the selection start to 1 second, press End to move to the far right digit (milliseconds), press Left Arrow three times to move to the seconds digit, and then press Up Arrow to increment it to one.
  5. Press Spacebar to listen to the first few clicks. There are two cases: if the recorded click is later than the original click at 1 second, then time to the first click is much less than the one second spacing of the remaining clicks; if the recorded click is earlier than original click, then the time to the first click is roughly the same as the one second spacing between the remaining clicks. Finding the position of the recorded click, and modifying Audacity's latency correction is described for these two cases in the following two steps.
  6. To find the position of the recorded click when it's later than the original click, go round the loop of incrementing the selection start by 10 milliseconds and then pressing Spacebar to check the time to the first click. When you've just gone past the click, it will suddenly change to roughly a second. Decrement the selection start by 10 milliseconds so that you can still hear the first click almost immediately, and then press Insert + Up Arrow to read the number of milliseconds. Adjust the latency correction by subtracting this number from it. For example, if the initial correction was -130ms, and the recorded click was 40ms late, then the latency correction should be changed to -170ms.
  7. To find the position of the recorded click when it's earlier than the original click, go round the loop of decrementing the selection start by 10 milliseconds, and then pressing Spacebar to check the time to the first click. When you move to just before the click, or during it, the click will suddenly sound immediately. Press Insert + Up Arrow to read the number of milliseconds. Subtract this number from 1000 to get the number of milliseconds by which the recorded click was early. Then adjust the latency correction by adding this number to it. For example, if the initial correction was -130ms and the recorded click was 20ms early, then the latency correction should be changed to -110ms.

Preferences

The Audacity Preferences dialog allows you to adjust many of the settings in Audacity. After a brief description of the dialog box, the following sections describe some of the more common settings.

Audacity Preferences dialog box

To open this dialog box, choose Preferences on the Edit menu (Ctrl + P).

On the left hand side of the dialog is a tree view which contains a list of categories. To the right of this tree view are controls for setting the options which correspond to the category which is selected in the tree view. The dialog's default button is the OK button.

Seek times

Whilst playing, you can jump (seek) forward or backward by either a short or long period. To set the values of the short and long periods:

  1. In the Audacity Preferences dialog, select the Playback category.
  2. Tab to the Seek Time when playing section which contains two edit boxes: Short period and Long period. Both times are in given in seconds.

Select all audio

The Select all audio option is described in the Select all audio option section of the Selecting audio section above. This option is on by default, but for users of screen readers, it's recommended that it is turned off. To set this option either on or off:

  1. In the Audacity Preferences dialog, select the Tracks category.
  2. In the Behaviors section, set the “Select all audio in project, if none selected” check box to be either checked or unchecked.

LAME MP3 encoder library

Due to legal issues about patents, the Audacity installation does not include an MP3 encoder. There are several patents covering MP3 encoding, and these are owned by a number of different companies. Up until very recently, the only company that has asked for royalties has been Thomson, and they are quite happy for people to use the free LAME MP3 encoder for private, non-commercial use. However, other companies are now fighting court battles over MP3 patents, and it remains to be seen how they view the private use of the LAME MP3 encoder.

Because of the way the audacity software is structured, it needs a copy of the lame encoder library that been compiled in a particular way, and so you have to use the LAME library which is available from the web page given in the instructions below – other versions of the LAME library don't work with Audacity 1.3.7 or later.

To download and install the LAME library:

  1. Go the website whose address is lame1.buanzo.com.ar .
  2. On this page, find the link which starts with lame and includes the word windows, and then open it to download a file which has the same name as the link.
  3. Open the downloaded file, and a setup wizard opens. The default location for the LAME library is a newly created Lame for Audacity folder in the Program Files folder, which is on your Local Disk.

The next time Audacity is opened, it should automatically find the LAME library. If there's any problem with this you can locate the library manually in the Preferences dialog. Under the Libraries category, there's a MP3 Export library Locate button which opens a dialog for manually locating the library.

FFmpeg library

The FFmpeg library contains decoders and encoders which enable Audacity to open and save files in formats which are not supported by the standard installation of Audacity. The FFmpeg library is not included with Audacity due to legal issues about patents. Nearly all encoders are covered by one or more patents, but these patents aren't recognised in all countries. The FFmpeg License and Legal Considerations page of the FFmpeg website contains a few comments on these issues.

To download and install the FFmpeg library:

  1. Go to the FAQ:Installation and Plug-Ins page of the online Audacity manual.
  2. Move to the heading “How do I download and install the FFmpeg Import/Export Library?”.
  3. Open the first FFmpeg installer link, and then download the file.
  4. Open the downloaded file, and a setup wizard opens. The default location for the FFmpeg library is a newly created FFmpeg for Audacity folder in the Program Files folder.

You then need to tell Audacity that the FFmpeg library has been installed:

  1. In the Audacity Preferences dialog, select Libraries in the category tree view.
  2. Tab to the FFmpeg Import/Export Library Locate button, and press it.
  3. A Success dialog opens, telling you that Audacity has automatically detected valid FFmpeg libraries, and asking you whether you still want to locate them manually. Press Enter to press the default No button.

Metadata editor opens during export

To set whether the Metadata editor automatically opens each time you export audio:

  1. In the Audacity Preferences dialog, select the Import/Export category.
  2. Move to the “Show Metadata Editor prior to export step” check box, which is in the When exporting tracks to an audio file section. This check box is checked by default.

Sampling

To set the sampling rate and format for a new project:

  1. In the Audacity Preferences dialog, select the Quality category.
  2. Tab to the Sampling: Default Sample Rate combo box. For music, set the rate to 44100 Hz, but for speech 22050 Hz is OK if you you need to keep file sizes to a minimum.
  3. Tab to the next control which is the Sampling: Default Sample Format combo box. Audacity recommend that you leave this on 32-bit float, but for speech 16-bit is fine.

Recording options

A number of recording options can be set in the Preferences dialog, and these are described in the Recording settings section of the Recording section.

Keyboard shortcuts

You can change the keyboard shortcut for any of the commands in Audacity. To do this, first select the Keyboard category in the Audacity Preferences dialog.

The first two controls are a Category combo box, and a List view which contains all the commands in the selected category, which by default is all. The other options in the combo box are each of menus in the menu bar, and the option “command” which includes all the commands not in these menus. The List view has two columns: Command and Key Combination.

To change a shortcut:

  1. In the List view, select the command whose shortcut you want to change.
  2. Then either:
    • To set a new shortcut: Tab to the edit box, and type the new shortcut; then Tab to the Set button and press it.
    • To remove the shortcut: Tab to the Clear button and press it.

To reset all the shortcuts to their default values, Tab to the Defaults button and press it.

Sound dialog in Vista and Windows 7

Vista's Sound dialog has three pages: Playback, Recording, and Sounds, and the dialog in Windows 7 has an additional communications page. The following sections describe how to open this dialog, the controls on the Recording page, and how to open a device's properties dialog where you can adjust the input level of the device.

Opening the Sound dialog

Here are a couple of ways of opening the dialog, and moving to the Recording page. Method one:

  1. Press Insert + F11 to open the Select a System Tray Icon dialog.
  2. On Vista, select Volume, and on Windows 7 select headphones or whatever is appropriate. Then press Enter to press the default Right Single Click button.
  3. The Volume's context menu opens. Choose Recording devices, which has the access key R, and the Sound dialog opens on the Recording page.

Method two:

  1. Open the Start menu, and type sound. The Sound Recorder program will probably be the initial match, but if you press Down Arrow one or more times, then this should move you to Sound, and then you can press Enter.
  2. The Sound dialog opens on the Playback page, so you then have to move to the Recording page.

Recording page

The recording page contains a list of devices, and when appropriate, one or more of the buttons: Configure, Set Default, and Properties. The commands provided by the buttons are also available on the context menus of the devices in the list, and it's normally easier to use these, rather than the buttons.

There are two options which control which devices appear on the list, and they appear on the context menu of any of the items in the list. The two options are Show Disabled Devices and Show Disconnected Devices, and by default both options are not checked. If you can't find a device which you think should be there, it may be disabled, and so will show up if the Show Disabled Devices option is checked.

For each item on the list there are three lines of text: its name, a short description, and its status, which can be working, disabled, or Not plugged in. Unfortunately, Jaws only reads the the first of these lines. If you need to read the other lines, then you can press Insert + Numpad Minus to route the Jaws cursor to the PC cursor, and then use Up Arrow and Down Arrow. To switch back to using the PC cursor, press Numpad Plus or Insert + Numpad Plus. One way of telling if a device is disabled without having to use the Jaws cursor, is to open its context menu: if there's an Enable item, then the device is obviously disabled.

Device properties dialog

To open the Properties dialog of a device which is selected in list on the Recording page, press Spacebar, or choose Properties from its context menu.

The input volume (level) can be set on the Levels page of this dialog. For many devices there's a single slider, but a microphone may also have a microphone boost slider.

Keystrokes

General

Command Keystrokes
Open audio file Ctrl + O
Import audio file Ctrl + Shift + I
New project Ctrl + N
Save project Ctrl + S
Preferences dialog Ctrl + P
Cycle forward through Toolbars, Track table, and Selection bar Ctrl + F6
Cycle backward through Toolbars, Track table, and Selection bar Ctrl + Shift + F6

Playback

Command Keystrokes
Start/Stop Spacebar
Pause/unpause P
Seek backward short period during playback Left Arrow
Seek forward short period during playback Right Arrow
Seek backward long period during playback Shift + Left Arrow
Seek forward long period during playback Shift + Right Arrow
Play cut/delete preview C
Play looped Shift + Spacebar
Output Device dialog Shift + O

Track table

Command Keystrokes
Move to previous track Up Arrow
Move to next track Down Arrow
Toggle selection of focused track Enter
Select all the tracks (and all the audio) Ctrl + A
Deselect all the tracks (and any time-range) Ctrl + Shift + A
Open menu of focused track Application Key or Shift + M
Close (Delete) focused track Shift + C

Audio track

Command Keystrokes
Change gain of focused track Shift + G
Change pan of focused track Shift + P
Mute/Unmute focused track Shift + U
Mute all tracks Ctrl + U
Unmute all tracks Ctrl Shift + U
Solo/Unsolo focused track Shift + S

Moving the cursor

Command Keystrokes
Move to start of tracks (time zero) Home
Move to end of all audio End
Move to start of audio in selected tracks J
Move to end of audio in selected tracks K
New cursor position at playback position [
Move backward short period Comma
Move forward short period Period
Move backward long period Shift + Comma
Move forward long period Shift + Period
Cursor left by a very small amount Left Arrow
Cursor right by a very small amount Right Arrow

Selecting a time range

Command Keystrokes
Select time range which includes all the audio, and select all tracks Ctrl + A
Selection end at start of tracks (time zero) Shift + Home
Selection end at end of all the audio Shift + End
Selection start at playback position [
Selection end at playback position ]
Selection end at start of audio in selected tracks Shift + J
Selection end at end of audio in selected tracks Shift + K
Extend left hand end of selection by a small amount Shift + Left Arrow
Extend right hand end of selection by a small amount Shift + Right Arrow
Contract left hand end of selection by a small amount Ctrl + Shift + Left Arrow
Contract right hand end of selection by a small amount Ctrl + Shift + Right Arrow

Editing

Command Keystrokes
Undo Ctrl + Z
Redo Ctrl + Y
Delete selected audio Delete
Cut selected audio Ctrl + X
Copy selected audio Ctrl + C
Paste Ctrl + V
Replace selected audio with silence Ctrl + L
Close (Delete) focused track Shift + C

Recording

Command Keystrokes
Record R
Append Record Shift + R
Pause/unpause P
Stop Spacebar
Audio Host dialog Shift + H
Input Device dialog Shift + I
Number of channels dialog Shift + N